South East Queensland Land & Water Rules, by Council

Queensland's shed exemption rules change based on cyclone wind region, which is the one piece of good news for South East Queensland — the entire region sits in Wind Region B (non-cyclonic), so the standard 10m² self-assessable shed exemption applies normally everywhere on this page, alongside the statewide 200m farm-building exemption (see the state-wide QLD article for the full detail). What still varies by council is water licensing detail and local planning scheme specifics.

Before you act on any of this: council rules change, and this page is a research aid, not a legal reference. Always confirm current requirements directly with your council and the Department of Resources before building a dam or shed.
Jump to a council:
All of South East Queensland is Wind Region B (non-cyclonic): under AS/NZS 1170.2, the entire SEQ corner — Brisbane, Gold Coast, Sunshine Coast, Moreton Bay, Ipswich, Logan, Redland, Scenic Rim and Lockyer Valley — sits in the non-cyclonic wind region. This means the standard 10m², 5m-side, 2.4m-high self-assessable shed exemption applies across every council on this page, without the cyclone-region exclusion that affects North and Central Queensland. The statewide 200m farm-building exemption (for genuine agricultural buildings set well back from a boundary, regardless of size) also applies uniformly here.

Brisbane City Council

Brisbane sits in Wind Region B, so the standard shed exemption thresholds apply without cyclone-region restriction. Dam and water licensing for any property with access to a watercourse falls under the Water Act 2000's stock-and-domestic exemption for basic use, with anything beyond that needing a water authorisation from the Department of Resources, regardless of council area.

Source: Brisbane City Plan; Queensland Development Code; AS/NZS 1170.2 wind region classification

City of Gold Coast

Gold Coast sits in Wind Region B. Genuine rural land in the Gold Coast hinterland (western parts of the LGA) may have access to the 200m farm-building shed exemption; the built-up coastal strip is capped at the standard self-assessable thresholds.

Source: Gold Coast City Plan; Queensland Development Code; AS/NZS 1170.2 wind region classification

Sunshine Coast Regional Council

Sunshine Coast sits in Wind Region B. The hinterland areas away from the coast have genuine rural land where the 200m farm-building exemption may apply, distinct from the built-up coastal strip.

Source: Sunshine Coast Planning Scheme; Queensland Development Code; AS/NZS 1170.2 wind region classification

Moreton Bay Regional Council

Moreton Bay sits in Wind Region B. Given Moreton Bay's own ratio-based livestock stocking system extends across genuine rural land in the LGA's northern and western areas, the 200m farm-building shed exemption has real application in those same areas.

Source: Moreton Bay Regional Council Planning Scheme; Queensland Development Code; AS/NZS 1170.2 wind region classification

City of Ipswich

Ipswich sits in Wind Region B. Given council's own livestock rules require rural zoning and a 4,000m² minimum lot for stock-keeping, the same rural areas have access to the 200m farm-building shed exemption on top of the standard thresholds.

Source: Ipswich Planning Scheme; Queensland Development Code; AS/NZS 1170.2 wind region classification

Logan City Council

Logan sits in Wind Region B. The standard shed exemption applies without cyclone restriction across this LGA, with genuine farm-building exemption potential on the same rural-zoned land where council's own sheep-and-goat density rules apply.

Source: Logan Planning Scheme; Queensland Development Code; AS/NZS 1170.2 wind region classification

Redland City Council

Redland sits in Wind Region B. Given council's own poultry rules already scale up sharply above 4,000m² of land, the same larger rural blocks are where the 200m farm-building shed exemption would have application.

Source: Redlands Coast Planning Scheme; Queensland Development Code; AS/NZS 1170.2 wind region classification

Scenic Rim Regional Council

Scenic Rim sits in Wind Region B, and is the most rural council in this SEQ group — consistent with its Planning Scheme's Rural Zone emphasis and its distinctive intensive-animal-industry provisions covered in our livestock rules page. The 200m farm-building shed exemption has substantial real application across this Shire.

Source: Scenic Rim Planning Scheme; Queensland Development Code; AS/NZS 1170.2 wind region classification

Lockyer Valley Regional Council

Lockyer Valley sits in Wind Region B (bordering Region A further inland), and is rural in character, consistent with its own detailed large/small-animal livestock tiers covered in our livestock rules page. The 200m farm-building shed exemption has substantial real application here.

Source: Lockyer Valley Planning Scheme; Queensland Development Code; AS/NZS 1170.2 wind region classification

Don't see your council listed? This page currently covers the 9 South East Queensland councils on our livestock page. Individual council-specific dam and water detail beyond the statewide framework is still being built out. The state-wide QLD article covers the default rules that apply everywhere in the meantime.

Frequently Asked Questions

Does the cyclone wind region shed restriction apply in Brisbane or the Gold Coast?

No. All of South East Queensland, including Brisbane, the Gold Coast, and the Sunshine Coast, sits in Wind Region B (non-cyclonic), so the standard 10 square metre self-assessable shed exemption applies without the restriction that affects North and Central Queensland's Wind Region C areas.

Does the 200 square metre farm-building exemption apply in SEQ?

Yes, wherever genuine agricultural land exists more than 200 metres from a property boundary. It's a statewide provision, not limited by wind region, though SEQ's more built-up councils have less land where it applies compared to Scenic Rim or Lockyer Valley.

Where do I find my own council's exact rules if it isn't listed here?

Check your council's own planning scheme, viewable through the Queensland Government's planning portal, or contact council directly.